ZGA455FD-H18
ZGA455FD-H18 Weak Basic Anion with High Capcity
1. Introduction:
“Hydrolite” ZGA455FD-H18 is a macroporous styrene series weak basic anion exchange resin that ZG developed for food industry. Compare to other weak basic anions, ZGA455FD-H18 has larger capacity and faster exchange speed, it is very suitable to adsorb organics and remove strong acid anion in water and non-water solutions. Under the same condition, the cost of water and regenerate agent will be less.
ZGA 455FD-H18 is with larger pore size and specific surface area, it could adsorb a lot of macromolecule organics, adsorbent rate could reach to 80-95%, and the elution rate is more than 95%, thus very suitable for desalination and decoloration of sugar starch.
ZGA455FD-H18 is with a few of strong basic group, in the process of operating, it will not adsorb small molecules, it is with great mechanical strength, high capacity and low swelling rate, thus very fit to the application of juices, drinks, potable water and food industry like starch sugar, beer, sorbitol, xylitol, amino acid and lactic acid etc., to improve the taste and transparent of its products.
2. Physical and Chemical Properties:
Items | Index |
Appearance | Milky white to light yellow opacity beads |
Matrix | Styrene |
Ionic Form | Free amine |
Moisture Content % | 42~50 |
Capacity mmol/ml | ≥1.80 |
True Density(Wet) g/ml | 1.03~1.06 |
Shipping Weight g/ml | 0.65~0.75 |
Whole Beads % | ≥90 |
Swelling % | ≤20 |
Particle Size Range % | (0.45~1.25mm) ≥95 |
3. Reference:
Items | Index |
Height of Resin Bed m | 1.5~3.0 |
Designed Back Wash Space % | 80~100 |
Back Wash % | 50~85 |
Regenerate Agent | NaOH |
Density of Regenerate Agent % | 4~5 |
Dosage of Regenerate Agent m3/m3-R | 2.2~2.5 |
Regenerate Contact Time min | 50~70 |
Replacement Time min | 30~50 |
Rinse Flow Rate m/h | 10~15 |
Operating Temperature °C | 30~60 |
pH Range | 0~7 |
4. Operation Guide
Operation | Solution | Flow Rate(BV/h) | Dosage (BV) |
Sugar Recovery | Clean Water | 2.0~4.0 | 2.0~3.0 |
Back Wash | Clean Water | 2.0~4.0 | 2.5~3.0 |
Regenerate | 4~5%NaOH Solution | 1.5~2.0 | 2.2~2.5 |
Replacement | DI or Pure Water | 1.0~2.0 | 1.5~2.0 |
Rinse | DI or Pure Water | 10~15 | 5.0~8.0 |
Flushing | DI Water | 10~15 | 5.0~10.0 |
Operating | Sugar Liquor | 2.0~4.0 | 50~100 |
Noted: When start to back wash, the flow rate should be slow, after all of the resins become flexible, increase back wash flow rate step by step, after resins are fully operating, stable back wash flow rate until the output water of back wash is clean.
5. Anion Operating Leakage Curve
Manufacturing location: Ningbo City, China.
Distribution: Shipped from ZG Ningbo Factory to all the provinces in China and overseas.